Lighting Designer

LED Board

Fixture Requirements
 
Select Application
Enter LPW
Select CCT
Enter Optical Efficiency
Select number of boards
Enter Lumens
Enter Driver Efficiency
No results found for these criteria.
No LED board selected.
Click the head to sort
Ordering Abbreviation Item No CCT (K) CRI Nominal Flux (lm) Length (mm) Width (mm) Calculated Efficacy (lm/W)

 
 

 

 

 

(*) Breakable boards, please review product specification sheet for more info.

LED Driver

No Driver selected.
Ordering Abbreviation Item No Original Item No Output Current (mA) Output Voltage (V) Control Interface Min Dim % AUX Input Voltage (Vrms)
mA
 
V
 
W
 
 
 
 

 

 
 

 

 

Summary



LED Board
Name
Item No
CCT (K)
CRI
Nominal Flux (lm)
Length (mm)
Width (mm)
Type
Product Specification
3D CAD File
Fixture
Wiring Allowance
- Parallel
- Parallel Daisy Chain
- One-to-One
No. of Boards
Luminous Flux (lm)
Optical Efficiency (%)
Driver Efficiency (%)
Luminous Efficacy (lm/W)
Calculated Efficacy
Output Power (W)
LED Driver Current (mA)
LED Driver
Name
Item No
Original Item No
Output Current (mA)
Voltage (V)
Application
Control Interface
Min Dim (%)
Auxiliary
Dim Circuit Protection
Dim to Off
Product Specification
3D CAD File
(*) Breakable boards, please review product specification sheet for more info.
 
DISCLAIMER: Please note that the tool gives expected/typical values and is based on measurements and approximations. All information in this calculation tools has been prepared with great care. eldoLED, however, does not accept liability for possible errors, changes and/or omissions and is not responsible for the correctness and completeness of the information contained in this calculation tool and eldoLED cannot be made liable for any damage that occurs in connection with the use of and/or reliance on the content of this calculation tool. Please note that this calculation tool is based on own measurements, tests, specific parameters and assumptions. Individual applications may not be covered and need different handling. Responsibility and testing obligations remain with the luminaire manufacturer/OEM/application planer.